Startup screen and screen language
Navigation: Settings → Display → Startup Screen (page title: "Startup Screen Settings")
The startup screen is the connection guide shown on the panel when the device starts up, so on-site staff can scan it with a phone to connect to the device and open the management interface. What it shows depends on the network mode; see Startup screen and network mode. The description below starts with the factory "Hotspot" mode.
What the startup screen shows
| Area | Content |
|---|---|
| Title | Get started with your device |
| Subtitle | Scan the codes step by step to start your cholesteric LCD experience! |
| Step 1: Join the device Wi-Fi | First QR code: after scanning, your phone joins the device's Wi-Fi hotspot automatically (no need to type the password) |
| Step 2: Open the device management page | Second QR code: after scanning, the management interface address opens (in Hotspot mode usually http://192.168.100.1) |
| Bottom info bar | SSID: (name of the network to join), URL: (management interface address), Orientation: (the screen orientation the system currently detects) |
- The layout adjusts automatically to the panel size and how the device is mounted (there are separate layouts for landscape and portrait).
- The
SSIDURLOrientationlabels in the bottom info bar are always in English and are not affected by the language setting.
Scan directly with your phone camera
The camera app on iPhone and most Android phones can scan QR codes directly. Scan step 1 first to connect to Wi-Fi, wait until your phone shows it is connected, then scan step 2.
Startup screen and network mode
The QR codes and address on the startup screen always point to a network the device can actually be reached on right now:
| Network mode | First card (step 1) | Second QR code and URL: | SSID: at the bottom |
|---|---|---|---|
| Hotspot | The hotspot's Wi-Fi QR code; scan it to join directly | The hotspot's management address | Hotspot name |
| Station | No Wi-Fi QR code; instead "Use the same Wi-Fi": "Make sure your phone is on the same Wi-Fi network as the device", with the name of the on-site network | The address the on-site network assigned to the device | On-site network name |
| Concurrent | Follows the "Address shown in Concurrent mode" setting (see the table below); by default the same as Station mode | Same as left | Same as left |
- Station mode shows no Wi-Fi QR code: the device doesn't print the on-site network's password on the screen. First join the same on-site Wi-Fi with your phone yourself, then scan the second QR code.
- If Concurrent mode is set to "Wi-Fi address" but the device isn't connected to the on-site Wi-Fi yet, the hotspot's details are shown instead (in Concurrent mode the hotspot is always on).
- In Station mode, after starting up, the device waits a while to get an address from the on-site network; if it never gets one, the startup screen isn't drawn, so that it never shows an address that can't be reached.
Address shown in Concurrent mode
Navigation: Settings → Display → Startup Screen
"Which network the startup screen’s QR code and URL point to. Hotspot mode always shows the hotspot and Station mode always shows the Wi-Fi address; only Concurrent mode can choose."
| Setting | Default | Options | Description |
|---|---|---|---|
| Address shown in Concurrent mode | Wi-Fi address | "Wi-Fi address", "Hotspot address" | After you change it, "Address source updated" appears |
Updated automatically after network changes
While the panel is showing the startup screen, it is redrawn automatically with the new content after any of these changes is completed:
- Switching the network mode
- Changing the hotspot name, password or other hotspot settings
- Changing "Address shown in Concurrent mode"
If the panel is showing another image, it isn't interrupted; the new content appears after you press Refresh QR Code or at the next startup.
Show QR code startup screen on boot
When enabled, the system first shows a startup screen with the Wi-Fi connection and control page QR codes after it boots. When disabled, if the device already has an enabled and valid schedule (an image set is selected and the image set contains images), the device goes straight into the slideshow after it boots.
| Setting | Default | Description |
|---|---|---|
| Show QR Code startup screen on boot | On | Saved as soon as you toggle it; shows "Startup screen enabled" or "Startup screen disabled" |
- This setting takes effect at the next startup.
- When it is off, the panel keeps the last image from before shutdown at startup (usually white, because the screen is cleared before shutdown), and the schedule then decides what to show.
- Even when it is off, you can still bring up the QR code screen at any time:
- Refresh QR Code at the top right of the Image Display page
- A physical button gesture (default: long-press any button for 1.5 seconds); see Physical buttons and gestures
- If the panel is showing the QR code screen when the device goes to sleep, the screen is cleared first (so nobody scans the code while the device is asleep).
Panel language
"Language of everything the device panel shows: startup and mode-switch screens, CMS info cards, engineering mode and error screens. Set separately from the language of this admin interface. Takes effect the next time a screen is drawn."
| Option | Description |
|---|---|
| Traditional Chinese | |
| English | |
| Japanese |
- The factory default language is decided at installation.
- After you change it, "Screen language updated" appears, but the screen is not redrawn right away. To see the new language immediately, go to the Image Display page and press Refresh QR Code.
- This only affects the screens on the device panel. To change the language of the management interface (browser), use the language menu at the top right; see Management interface tour.
Why there are two languages
The device sits at the customer's site, and its screen is for people there to read; the management interface is used by the installers, and the two languages are often different. For example, a sign at a trade show in Japan may show Japanese on its screen while engineers in Taiwan manage it in the Chinese interface.
Mode-switching screen
On devices with the CMS module, when switching to CMS mode the panel shows a "Mode Switcher" explanation screen (current mode, mode after switching, and a restart notice). It uses the same language setting as the startup screen. See CMS / standalone mode switching.
FAQ
Q: I scanned the Wi-Fi QR code but can't connect?
- Your phone must support 5 GHz Wi-Fi; the device hotspot uses 5 GHz out of the factory.
- The device may be asleep (hotspot off). Press a physical button to wake it up first.
- Make sure you are scanning the QR code currently shown on the device, not an old photo or screenshot.
Q: The second QR code doesn't open the web page? Your phone may have switched back to another network automatically because "this Wi-Fi has no internet." See Connecting to the device.
Q: The screen has only one QR code, and the first card shows just a network name? The device is in "Station" mode (or Concurrent mode set to "Wi-Fi address"). First connect your phone to the on-site Wi-Fi named on the card, then scan the second QR code; see Startup screen and network mode.
Q: The QR code screen doesn't appear after startup? Check whether "Show QR Code startup screen on boot" is on. You can also press "Refresh QR Code" or use the button gesture to bring it up.
Q: I changed the language, but the screen still shows the old one? The language takes effect the next time the screen is shown. Press "Refresh QR Code" to show it again.
Q: What is Orientation at the bottom of the screen? The device orientation the system currently detects (0°/90°/180°/270°). It is useful when the screen orientation is wrong; see Screen orientation and G-Sensor.
Related: Connecting to the device, Physical buttons and gestures, Network settings