FAQ
General
Q: Do I need an internet connection to use it? No. The device broadcasts its own Wi-Fi hotspot, and you manage it directly once your phone is connected. If there is Wi-Fi on site, you can also connect the device to the on-site network ("Station" or "Concurrent" mode); see Network settings. You need the internet to download software update files (download them on a phone or computer, then reconnect to the device and upload them).
Q: Do I need to install an app? No. Just open the management interface in the browser on your phone or computer; when you're connected to the device's hotspot, the default address is http://192.168.100.1.
Q: Can several phones manage it at the same time? Yes, and everyone's screen stays in sync in real time. But the panel can refresh only one image at a time, so when several people display images at once, the later request is rejected.
Q: Can I manage it remotely? In standalone mode you can only manage it within range of the hotspot, or when you're on the same on-site network as the device. If you need to manage many devices centrally and remotely, ask about the CMS central management solution. See CMS / standalone mode switching.
Q: Can I change the hotspot name or password? Yes. Change the name, password, security type and channel in the hotspot settings under "Settings → System → Network". See Network settings — Changing the hotspot name and password. A factory reset returns the hotspot to this device's factory values.
Q: Which languages does the management interface support? 繁體中文, English and 日本語; switch in the top-right corner. The language of the startup screen on the device itself is changed separately in "Startup Screen Settings".
Images
Q: Which image formats are supported? JPG and PNG are recommended. You can also use BMP, GIF (first frame), WebP and TIFF. SVG and the iPhone HEIC format are not supported.
Q: Is there a size limit for images? There is no file size (MB) limit, but an image can't have more than about 80 million pixels (for example 10000 × 8000). JPG photos can be larger (the system scales them down while decoding), so even a photo taken in a phone's 200-megapixel mode can be uploaded.
Q: What size should I make my images? Match the panel's effective resolution: 13.3-inch 1024 × 768, 27.6-inch / 32-inch 1920 × 1080, 24.8-inch 1530 × 1080 (swap width and height in portrait).
Q: Can it play videos or animated GIFs? No. A cholesteric LCD takes some time to refresh one image (depending on the model and refresh mode, for example about 6 seconds on the 13.3-inch, about 16 seconds on the 27.6-inch, about 20 seconds on the 32-inch), so it is only suited to still images. A GIF shows only its first frame.
Q: Can I display a PDF? Yes. Use "Upload PDF" to turn the pages into a collage image. See PDF collage.
Q: Why does it take so long after I display an image? It's how cholesteric LCDs work: the time to refresh one image depends on the model and refresh mode, for example about 6 seconds on the 13.3-inch, about 16 seconds on the 27.6-inch, about 20 seconds on the 32-inch. The upside is that once refreshed, the image stays on screen without using power.
Q: Can I sort the image gallery? The image gallery itself can't be sorted (newly uploaded images come first). If you need a particular playback order, create an image set and arrange the images in it.
Schedules
Q: Does a schedule "keep rotating images during a period of time"? No. Each time the scheduled time arrives, it switches to the next image in the image set and keeps it until the next scheduled time.
Q: Can I set "every 45 minutes"? The current settings don't support it. A fixed interval can only be a number that divides evenly into 60 minutes or 24 hours. See Image change frequency in detail.
Q: What happens if two schedules trigger at the same time? The one higher in the list runs, and the one lower in the list (marked "Conflict") is skipped this time. We recommend staggering their times. See Simultaneous triggers and skipped runs.
Q: What is schedule priority for? Dragging to reorder sets the display order and also decides which one runs when they trigger at the same time: the one higher in the list runs, and the one lower in the list is marked "Conflict" and skipped this time.
Q: Do schedules still run while the device is asleep? Yes. The device wakes up automatically about 3 seconds before a schedule.
Q: Are schedules kept after a power loss? Yes. Schedules and all settings are stored on the device and work as usual after it restarts.
Sleep and power
Q: Why doesn't the device sleep even though sleep is on? The most common reason is that someone has the management interface open (it then needs to be idle for at least 15 minutes). See The device never goes to sleep.
Q: Does the image disappear during sleep? No. A cholesteric LCD keeps its image without power. Only the QR code startup screen is cleared before sleep (to a single background color, black or white).
Q: How do I reconnect after the device goes to sleep? Press a physical button once to wake it up, wait a few seconds for the hotspot to start again, then connect.
Q: What's the difference between shutting down and sleep? After shutting down, someone has to handle the power on site to turn it back on, and schedules don't run; sleep can be ended automatically by a schedule or a button press. Use sleep to save power day to day.
Q: How long does the battery last? It varies a lot depending on the image change frequency, whether sleep is on, and whether the light is used. "Time left" in the management interface is estimated from the current draw and is for reference only.
Buttons
Q: What can the two physical buttons do? Switch to the previous / next image, clear the screen, show the connection QR code, wake up the device, and factory reset (hold for 40 seconds). You can also connect a presenter remote to change images. See Physical buttons and gestures.
Q: After holding a button to bring up the QR code, the status LED started flashing quickly? That means the factory reset countdown has started. Let go right away. Holding it for the full 40 seconds erases all data.
Updates and maintenance
Q: Where do I download software updates? On the Downloads page of this website.
Q: Will an update erase my images and schedules? No. A software update keeps all images, image sets, schedules and settings.
Q: Can a failed update brick the device? If an update fails, the device automatically restores the previous version and restarts.
Q: What does a factory reset erase? All images, image sets, schedules, settings and logs, and the Wi-Fi networks added by users are deleted; the hotspot name and password return to this device's factory values. The time zone and model are kept. See Factory reset.
Q: Does the device recover by itself if the management app or the system hangs? Yes, with nothing to configure. If the management app stops responding, it restarts by itself within about a minute. If the whole system stops responding, the hardware restarts the device automatically. The records from before and after the problem are saved in a black box incident package.
Q: What should I provide when contacting technical support? See Before contacting technical support.