Skip to content
This page was translated from the Traditional Chinese original and has not yet been reviewed by a person. If anything is unclear, the Chinese version is authoritative.

Viewing: HTML | Download the full feature guide as PDF

Screen orientation and G-Sensor ​

Navigation: Settings → Interaction → G-Sensor Settings

The device has a built-in orientation sensor (G-sensor) that detects whether the sign is in landscape, portrait, or upside down, and turns the screen the right way up automatically. You can also turn off auto-rotate and fix the screen in one orientation.

Two kinds of "rotation" ​

Device orientation (this page)Image rotation
WhereSettings → G-Sensor SettingsThe "Rotate Image" button on the Image Display page
Applies toThe output orientation of the whole panelThe content of a single image
How it is setDetected automatically, or fixed manuallySet manually, stored per image
UseTurn the screen the right way up however the sign is mountedThe image itself is tilted or in the wrong orientation

The two are independent and add up. When the screen orientation is wrong, first decide whether it is "the whole device's orientation" or "one particular image" that is wrong.

Enable G-Sensor auto-rotate ​

"When enabled, the screen rotates automatically based on physical orientation."

SettingDefault
Enable G-Sensor Auto-RotateOn

Saved as soon as you toggle it; shows "G-Sensor enabled" or "G-Sensor disabled".

How auto-rotate works ​

  1. The system reads the orientation sensor every 0.3 seconds. It decides the device has turned only after detecting the same new orientation twice in a row (about 0.6 seconds).
  2. Once the turn is confirmed:
    • The panel is showing an image → it automatically refreshes the same image again in the new orientation.
    • The panel is showing the QR code startup screen → the startup screen is redrawn in the new orientation.
    • The panel is white (screen cleared) → nothing happens.
  3. The preview frame and orientation label on the web page update too.
OrientationDescription
0°Landscape (original orientation)
90°Rotated 90° clockwise
180°Upside down
270°Rotated 90° counterclockwise

No rotation when lying flat

When the sign is lying flat on a table (screen facing up), the sensor can't tell the orientation, so the system keeps the current orientation. Stand the sign up before adjusting.

If the panel is busy when the device turns

If the panel is refreshing another image at the moment the device turns (for example, a schedule is changing images), this automatic re-refresh is skipped and the screen stays in the old orientation. Wait for the refresh to finish, then display an image manually.

Fixed orientation ​

When you turn off "Enable G-Sensor Auto-Rotate", the "Fixed Orientation" option appears:

"When disabled, the screen is fixed at the selected orientation."

OptionDefault
0° (Landscape), 90° (Clockwise), 180° (Inverted), 270° (Counter-clockwise)0°

Saved as soon as you select it (no message on success; "Failed to save" on failure).

When to use it: the sign is mounted on a wall and never moves, or sensor interference makes the screen keep turning back and forth.

Changing it doesn't refresh the panel

After you turn auto-rotate on or off, or change the fixed orientation, the panel is not redrawn right away. Go to the Image Display page and display an image, or press "Refresh QR Code", to see the new orientation on the panel.

After you turn off auto-rotate and choose a fixed orientation, the fixed orientation you chose is kept after a reboot as well (including the startup screen).

Devices without a G-sensor ​

  • If "This hardware has no G-Sensor" appears at the top of the page, the switch can't be used.
  • If a red "Orientation sensor (G-sensor) fault" appears at the top of the page, the sensor can't be read; see Hardware warnings. Temporary workaround: turn off auto-rotate and use a fixed orientation.

Mounting orientation and models ​

Each model mounts its main board at a different angle inside the case. This is set at the factory during installation; you don't need to, and can't, change it. If the whole device is always off by 90° or 180°, the wrong model may have been chosen at installation. Contact technical support.

FAQ ​

Q: The screen is upside down or rotated 90°?

  1. Check the G-Sensor settings: when enabled, the screen follows how the device is actually mounted; when disabled, it follows "Fixed Orientation".
  2. After changing the setting, display an image for it to take effect.
  3. If only one image is in the wrong orientation, it's that image's "Rotate Image" setting.
  4. Check Orientation: at the bottom of the startup screen to see which orientation the system currently detects.

Q: I turned the sign but the screen didn't turn with it?

  • Make sure auto-rotate is enabled.
  • Is the sign lying flat? Stand it up.
  • Was the panel refreshing when you turned it? Display an image manually.
  • The panel doesn't refresh automatically when it is currently white.

Q: The screen keeps turning by itself? This can happen when the sign is mounted at an angle close to the boundary between two orientations (for example, tilted 45°). Straighten it, or use a fixed orientation.

Related: How images are processed, Image gallery and displaying images, Hardware warnings

Green Ideas Technology