Presenter remote
Navigation: Settings → Interaction → Presenter Remote
After you plug in the USB receiver of a commercially available presenter remote (page-turner), you can use the presenter remote to go to the previous/next image, and also bring up the "presenter remote menu" on the screen.
Presenter remote settings page
| Setting | Default | Description |
|---|---|---|
| Enable presenter remote control | On | "Plug in the remote's USB receiver to switch to the previous/next image. Turn off when not in use." |
| Connection | — | "Whether the remote's receiver is detected": "Off", "Connected: name", "No presenter remote detected" |
| Key mapping | — | "Next image", "Previous image" |
| When changing pages | Switch immediately | "Switch immediately" or "Wait for it to finish"; see Changing pages during a refresh |
| Key test | — | Press any key on the presenter remote to check that the device receives it. While the feature is off, "Enable presenter remote control first" is shown |
- The presenter remote switches within the same range as the physical buttons (Button switching range).
- A page change with the presenter remote counts as activity and restarts the idle time for sleep.
Presenter remote keys
| Key | Normal screen | While the menu is open |
|---|---|---|
| Page Down (PgDn) | Next image | Move down |
| Page Up (PgUp) | Previous image | Move up |
| Tab | Open the presenter remote menu | Run the selected item |
| Enter | — | Close the menu |
| Volume + / Volume - | Turn the light on/off (models with a light) | Turn the light on/off (models with a light) |
Key names on the presenter remote vary by brand; the device recognizes the keys the presenter remote sends. You can check what each key sends in "Key test".
Presenter remote menu
Pressing Tab overlays a vertical menu on the left side of the screen, with a thin band and arrow marking the selected item:
| Item | Action |
|---|---|
| Show QR Code | Closes the menu and shows the QR code startup screen |
| Clear screen | Closes the menu and clears the screen |
| Pick a photo | First choose "All photos" or an image set, then pick an image from the thumbnails (film strip) stacked vertically on the left; press Tab to display that image and close the menu |
| Light (models with a light) | Turns the light on/off. While a light schedule is enabled, "Scheduled" is shown and it can't be switched |
| Restart | First opens a confirmation ("Restart now?") with "Cancel" selected; choose "Restart" and press Tab again to clear the screen and restart |
| Shut down | Same as above with "Shut down now?"; choose "Shut down" and press Tab again to clear the screen and shut down |
- Moving the arrow refreshes only the thin strip with the arrow, which is much faster than a full refresh.
- The menu closes automatically after a period with no key presses: 10 seconds for the menu, 30 seconds for Pick a photo.
- When the menu closes, the image that should currently be shown is fully redrawn. Schedule image changes that come due while the menu is open are noted, and the latest image is drawn directly when the menu closes.
- Pressing Tab while the panel is refreshing another screen doesn't open the menu.
- Pick a photo lists only image sets that contain images. If an image set's name contains characters the device screen's font can't draw, the menu shows it as "Photo set N" (N is the order in which the image set was created); you're told about this when naming it in Image sets.
Volume keys turn the light on/off quickly
Without opening the menu, press "Volume +" on the presenter remote to turn the light on and "Volume -" to turn it off. While a light schedule is enabled, the light is controlled by the schedule and the volume keys don't change it.
Related sections: Physical buttons and gestures, Light schedule and light, Image sets, Sleep and wake up