Skip to content
This page was translated from the Traditional Chinese original and has not yet been reviewed by a person. If anything is unclear, the Chinese version is authoritative.

Viewing: HTML | Download the full feature guide as PDF

How cholesteric LCDs work ​

A cholesteric LCD works differently from a phone or TV screen. Once you understand its characteristics, you'll see why many of this product's features are designed the way they are.

Keeps the image without power (bistable) ​

A regular screen needs constant power to show an image. A cholesteric LCD, once a refresh finishes, keeps the image on screen even after the power is cut.

This means:

CharacteristicWhat it means for you
Showing static content uses almost no powerThe panel is powered only while the image changes and is switched off as soon as the refresh is done. Battery models can run for a long time
The image stays during sleepEven when the device sleeps, or is shut down, the panel still shows the last image
Clear the screen before shutdownIf you cut power without clearing the screen, the panel stays on the same image for a long time. That's why the system clears the screen before shutting down, restarting, or switching modes
No frequent refreshes neededThe "change frequency" only decides how often the content changes. A low frequency won't make the image disappear

Reflective display, no backlight ​

A cholesteric LCD displays by reflecting ambient light instead of emitting its own:

  • It's clearly visible in bright places, even in direct sunlight outdoors.
  • In dim places it needs external lighting. Some models can be fitted with an optional light, which you can then control automatically with a light schedule.
  • It's easy on the eyes, which suits notices and signage that people look at for a long time.

Refreshing takes time ​

A cholesteric LCD changes images more slowly than a regular screen. Refreshing one image takes a while (it depends on the model and refresh mode, for example about 6 seconds on the 13.3-inch, about 16 seconds on the 27.6-inch, and about 20 seconds on the 32-inch). The first time you display an image on the panel, it also takes a little extra time to convert it.

Because of this:

  • The panel can handle only one refresh at a time. Other image changes requested during a refresh are rejected, not queued, so wait until the refresh finishes before doing anything else. (Page changes from the physical buttons and the presenter remote are an exception; see Physical buttons and gestures.)
  • It isn't suited to video or animation; it's suited to static content that changes on a schedule.
  • Don't change images too often. For typical signage, once every 10 minutes or more is recommended.

Display quality ​

  • Designs with high contrast, large text, and bold lines look the clearest.
  • Small text, light colors, and large gradients may not stand out as much on the panel as they do on a computer screen.
  • Check important content on the actual device, not just in the web preview.

Refresh modes ​

The panel driver board supports several different refresh waveforms. Which modes each panel can use, and which one is the default, is determined by the manufacturer's panel compatibility list; most panels have only one mode and need no adjustment. See Scan direction and refresh mode.

Use and storage tips ​

  • Before leaving the device unused for a long time, clear the screen and then shut it down. See Long-term storage.
  • If ghosting from the previous image appears, clear the screen first and then display the image again.
  • On the 32-inch frameless model, you can turn on the Edge Mask to slow down liquid-crystal degradation along the panel edges.

Related sections: Product overview, How images are processed

Green Ideas Technology