Skip to content
This page was translated from the Traditional Chinese original and has not yet been reviewed by a person. If anything is unclear, the Chinese version is authoritative.

Viewing: HTML | Download the full feature guide as PDF

Message reference ​

Messages that may appear in the management interface, grouped by feature. You can also use the search at the top right of this site and type the message text you see.

Site-wide notices ​

MessageMeaningWhat to do
Lost connection to the deviceThe live connection to the device has been down for more than 6 secondsMake sure you're connected to the device's Wi-Fi and tap "Reconnect". See Connecting to the device
That action did not take effect — the device is unreachableNo response after the action was sentFirst check the image gallery, schedules, or settings to see the result; retry only if it wasn't done
The device is about to sleep60-second idle countdownTap "Keep Awake" to cancel. See Sleep and wake-up
Orientation sensor (G-sensor) faultThe orientation sensor can't be readRestart the device. See Hardware fault warnings
Real-time clock (RTC) faultThe hardware clock can't be readRestart the device. See Hardware fault warnings
Cannot identify the panel; refreshing is pausedThe Tcon firmware version can't be read, so images aren't displayed for now; the system keeps retryingIf it keeps appearing, restart the device or contact technical support. See Hardware fault warnings
Panel model not supported; refreshing is pausedThe panel model isn't on the factory compatibility listContact technical support to update the software
Machine data does not match the panelThe screen size in the model data doesn't match the panelContact technical support to check the model data
Battery service unavailable — tap for detailsBattery data can't be readSee Battery
Request failed.The device reported that the action failedReload the page and try again
Sorry, the page you visited does not exist.Wrong URLTap "Back Home"

Error codes ​

"Response status:number" is an error code returned by the device, usually shown together with a text message:

CodeMeaningCommon situations
400The content sent is invalidUploading a file that isn't an image, an unsupported format, an incomplete update package
404Not foundThe image was deleted, the feature doesn't exist on this model, the temporary PDF has expired
409Conflict or busyThe panel is refreshing; turning the light on or off manually while a light schedule is enabled
413Too largeThe image has too many pixels, the PDF is over 50 MB, the update package is over 128 MB
500Internal device errorDamaged file, storage full, processing failed
503Service temporarily unavailableThe battery service isn't responding, the hotspot control interface isn't enabled yet

Image display ​

MessageMeaning
All images uploaded successfullyUpload finished
Upload completed, some images failedAt least one failed
Upload failedThis image failed to upload; see Image upload fails
Command sent, processing in background...The display command was accepted and the panel is refreshing
Send failed, device may be busyThe panel is handling another refresh
The screen could not be refreshed. Please try again later; if it keeps happening, check the system logs.The panel refresh failed. See Image gallery and displaying images — When a refresh fails
Refreshing...The panel is refreshing
Screen cleared / Failed to clear the screenResult of clearing the screen
QR Code screen refreshed / Failed to refresh QR Code screenResult of showing the startup screen
Screen is currently blank (reset)The panel is currently cleared to a single background color (black or white)
Currently showing the QR code startup screenThe panel currently shows the startup screen
Image rotated to N° / Image rotation failedRotation result
Fit mode changed to "…" / Fit mode change failedResult of the fit mode setting
Successfully deleted N image(s) / Deletion failed / Batch deletion failed, please try again laterDeletion result
These images will also be removed from the following image sets:Reminder before deleting images, listing the affected image sets

PDF collage ​

MessageMeaning
Uploading PDF…Uploading
PDF upload failedUpload failed
Not a PDF file (content-type: …)The selected file isn't a PDF
PDF file X.XMB exceeds the 50MB limitFile too large
PDF has N pages, exceeding the 60-page limitToo many pages
You can select up to 30 pagesToo many pages selected
Please select at least one pageNo pages selected
PDF session not found: …The temporary file has expired (4 hours) or the device has restarted; upload again
Failed to generate previewPreview generation failed
N image(s) created / Failed to createCreation result

Image sets ​

MessageMeaning
Image set created successfully / Failed to create image setCreation result (fails if the name is over 100 characters)
Please enter image set nameName not filled in
Image set updated successfully / Failed to update image setRename result
Image set deleted / Failed to delete image setDeletion result
These schedules use this image set. After deleting it they will stop changing images until you choose another image set:Reminder before deleting an image set
This image set is bound to the buttons. After deleting it, the buttons will switch through the whole gallery instead.Reminder before deleting an image set
The presenter menu on the device cannot draw some characters in this name…The name is shown as "Image set N" in the presenter remote menu
Successfully added N images / Failed to add imagesResult of adding images
Successfully removed N images / Failed to remove imagesResult of removing images
Image set cleared / Failed to clear image setClearing result
Reorder failedDrag-and-drop reordering failed and was reverted
Set as the button-controlled image setThe physical buttons now switch images within this image set
Unbound, buttons will cycle through the whole galleryThe physical buttons switch through the whole image gallery again
No images in this setThe image set is empty
No available images in galleryUpload images first

Schedules / light schedules ​

MessageMeaning
Schedule created/Schedule updated/Schedule deletedAction succeeded
Schedule enabled/Schedule pausedEnabled state changed
Creation failed/Update failedSaving failed (invalid cron format, image set doesn't exist)
Please fix the cron expressionInvalid frequency setting
Please enter a schedule name/Please select an image set/Please select turn on or turn offRequired field not filled in
Operation failedEnabling/disabling failed
Failed to update priorityDrag-and-drop reordering failed
Timezone mismatchThe browser and device time zones differ; see Schedules — Time zone
Device timezone updated to … / Failed to sync timezoneTime zone sync result
This image set has no images yet, so nothing will be shown when the schedule fires.Reminder that you picked an empty image set
Image set created and selected / Added N image(s)Creating an image set / adding images from the schedule form succeeded
ConflictExpected to fire at the same time as another schedule; this one is ordered later and will be skipped this round
Disabled / PausedThe schedule won't fire for now
No image set selectedThe schedule has no image set (the image set may have been deleted)

Settings ​

MessagePageMeaning
Sleep enabled/Sleep disabled, Idle timeout updatedSleep SettingsSettings saved
The system is about to restart/The system is about to shut downPower ControlCommand executed
System action failed. Please try again later.Power ControlCommand failed
Settings savedButton Trigger SettingsSettings saved and in effect immediately
Gesture ranges overlapped — the other side was adjusted automatically to avoid a conflictButton Trigger SettingsTwo gestures conflicted and were corrected automatically
G-Sensor enabled/G-Sensor disabledG-Sensor SettingsSettings saved
This hardware has no G-SensorG-Sensor SettingsNo orientation sensor
Startup screen enabled/Startup screen disabled, Screen language updatedStartup Screen SettingsSettings saved
Scan mode savedTcon Scan ModeSettings saved (takes effect the next time an image is displayed)
Time synchronized successfully/Time set successfullyTime SettingsTime sync complete
NTP auto-sync enabled/NTP auto-sync disabledTime SettingsNTP setting saved
The service failed to start — another time-sync service on this device…Time SettingsTime service conflict; contact technical support
Scheduled jobs switched to new timezoneTime SettingsTime zone updated
Timezone saved, but scheduled jobs require a service restart to applyTime SettingsRestart the device
Device disconnected/Could not disconnect the deviceNetworkDisconnect result
The hotspot control interface is not enabled on this device yet; it becomes available after a restart.NetworkAvailable after a restart
Presenter remote control enabled/disabled, Page switching updatedPresenter RemoteSettings saved
Enable presenter remote control firstPresenter RemoteMust be enabled before the button test
Copied to clipboardSystem LogsCopied
Firmware update successful/Firmware update failedTcon FirmwareUpdate result
Only .bin firmware files are acceptedTcon FirmwareWrong file format
Failed to read firmware versionTcon FirmwareRead failed
Battery info updated/Battery Service UnavailableBattery InfoRead result

Software update / factory reset ​

MessageMeaning
Please select a .tar.gz update packageThe file name doesn't end in .tar.gz
Reading update package info...Reading the update package
This file is not a valid update package. Please check that the download is completeThe update package contents can't be read
The update package is larger than 128 MB and cannot be usedThe file is too large
Installing update, please wait... / Will reconnect automatically after rebootUpdate in progress
Update Successful / Update Failed / Update Result UnconfirmedUpdate result; see Software update
Connection Timed OutThe result couldn't be confirmed within 5 minutes
Upload failed: checksum mismatch…The file is damaged; download it again
Upload failed: update package exceeds the 128 MB limitNot a valid update package
Resetting to factory defaults, please wait...Factory reset in progress
Factory Reset CompleteDone
Factory reset failed, please try again laterFailed

Mode switching ​

MessageMeaning
Switching Mode...Switching; don't close the page or cut the power
Mode Switch InitiatedThe device will restart and switch to CMS mode
Cannot switch: sbc-display module not installedThis device has no CMS module
Already in CMS ModeThe device is already in CMS mode
Cannot switch to CMS yetNo Wi-Fi network has been saved yet; CMS mode needs the device to be connected to a network

Green Ideas Technology