CMS / standalone mode switching
Navigation: Settings → System → Mode Switcher
Applicable models
"Mode Switcher" appears on the Settings page only on devices with the CMS module installed. If you don't see it, the device supports standalone mode only.
Devices with the CMS component do not need to switch
This page describes the old way of switching. Devices with the new CMS component do not show "Mode Switcher" and use the "CMS Connection" page instead: the standalone features and CMS work side by side, and "control" decides who is in charge of the screen. See CMS connection and control. If such a device still receives a switch request, it shows "This device has the built-in CMS component. Please set it up on the "CMS Connection" settings page".
The two modes
| Standalone mode | CMS central management mode | |
|---|---|---|
| How it's managed | On site, connect your phone to the device's hotspot and use the management interface | Managed remotely and centrally by a content management system (CMS) |
| Network | The device broadcasts its own Wi-Fi hotspot; no internet needed | The device connects to a specified Wi-Fi network; a stable network is required |
| This management interface | Available | Not available |
| Best for | One or a few devices; no network on site | Managing many devices centrally |
Everything in this manual describes standalone mode features.
Switching from standalone mode to CMS mode
CMS mode relies on the on-site Wi-Fi to reach the CMS system, so before switching, "Wi-Fi" in Network settings must contain at least one saved network. While the list is empty, the "Switch" button is grayed out and the top of the page shows:
Cannot switch to CMS yet
CMS mode needs the device online, but no network is saved under “Wi-Fi”. Add one first, then come back.
Press "Set up Wi-Fi" to add a network, then come back to this page to switch.
Check before switching
- After switching, the device's Wi-Fi hotspot disappears, you lose your connection to this device, and this management interface can no longer be used.
- You can't switch back to standalone mode from this page; it has to be done through the CMS system or by your administrator.
- Make sure the CMS management system is ready to take over this device first.
- On the "Switch to CMS Mode" row, press the red Switch button.
- Read the warning: "After switching to CMS mode, the device will connect to the default Wi-Fi network and be managed by the central server. This control page will become unavailable and you will lose connection to the device."
- Type lowercase
confirmin the input box. - Press Confirm Switch to CMS Mode (available only when the text is typed correctly).
- "Switching Mode..." and a progress bar are shown, with the reminder "Do not close this page or disconnect power".
- On success, "Mode Switch Initiated" is shown.
During the switch, the device:
- Shows a "mode switching" information screen on the panel (current mode, mode after switching, and that it will restart after switching). Its language follows the startup screen settings.
- Sets the next startup to use CMS mode.
- Clears the panel and restarts.
From then on, the device is managed by the CMS system, and the CMS decides what the panel shows.
Your data is not deleted
Switching modes doesn't delete the images, image sets, schedules and settings from standalone mode.
If the switch fails
| Situation | Cause |
|---|---|
| You're returned to the original page with "Response status:500" | The panel is refreshing, or something went wrong during the switch. Wait for the panel to finish refreshing and try again |
| "Cannot switch: The sbc-display module is not installed. Switching functionality is unavailable." | This device doesn't have the CMS module installed |
| "Already in CMS Mode" | The device is already in CMS mode |
| "Cannot switch to CMS yet", with the "Switch" button grayed out | The "Wi-Fi" list has no networks; first add one in Network settings |
Switching from CMS mode back to standalone mode
"The system is currently running in CMS mode. To switch back to Standalone mode, please use the CMS system or contact your administrator."
Related: Startup screen and screen language, Connecting to the device, Network settings