Connecting to the device
The device doesn't need the internet. Out of the factory it broadcasts its own Wi-Fi hotspot; you connect your phone or computer to that hotspot and open the management interface in a browser.
This page covers connecting through the hotspot (the factory-default "Hotspot" mode). Once the device is set to join the on-site Wi-Fi ("Station" or "Concurrent" mode), your phone can also join the same on-site Wi-Fi and open the management interface at the address the on-site network assigned to the device; see Network settings.
Requirements
| Item | Requirement |
|---|---|
| Phone / computer | Supports 5 GHz Wi-Fi (the device hotspot uses 5 GHz out of the factory; older devices that support only 2.4 GHz won't see it) |
| Browser | A recent version of Chrome, Safari, Edge, etc. |
| Network | No internet needed |
How to connect
Method 1: Scan the QR codes on the startup screen (easiest)
- After the device starts, the panel shows the startup screen. If the panel isn't showing the startup screen, bring it up with the physical button gesture (default: long-press any button for 1.5 seconds, then release immediately); see Physical buttons and gestures.
- Scan the step 1 QR code with your phone camera. When your phone asks whether to join the Wi-Fi, choose "Join".
- Wait until your phone shows it is connected to the device's Wi-Fi.
- Scan the step 2 QR code to open the management interface.
Method 2: Connect manually
- In the Wi-Fi settings of your phone or computer, find the device's hotspot name (shown as
SSID:at the bottom of the startup screen; usually the device name). - Enter the hotspot password (see Hotspot password below; once connected, you can also see it in the hotspot settings of the management interface).
- Open a browser and go to
http://192.168.100.1(the hotspot's default address; if someone changed the IP address in the hotspot settings, use the new address instead).
Use http, not https
Type http://192.168.100.1. Some browsers change it to https:// automatically, which won't connect. Make sure the address bar starts with http://.
Phones that have connected before
Once your phone remembers the device's Wi-Fi, it usually connects automatically the next time you're nearby. Bookmark http://192.168.100.1 or add it to your home screen so it's easy to open next time.
Hotspot password
The hotspot name and password can be changed in the hotspot settings of the management interface. If they've never been changed, the password is the factory password:
| Device | Factory hotspot password |
|---|---|
| Devices freshly installed and shipped from 1.11.0 on | Different for every device, randomly generated at installation and printed on the label on the device body |
| Devices shipped earlier and upgraded to 1.11.0 by software update | Keep their original password; the software update doesn't change it, so phones on site still connect. Ask the installer for it |
- A factory reset returns the hotspot name and password to this device's own factory values. For a device with a label on its body, that's the password on the label.
- Once you change the hotspot password, the password on the label no longer applies; if you forget the new password, a factory reset takes you back to the password on the label (it deletes the device's data; see Factory reset).
Keep the label on the device body
The startup screen is usually covered by the slideshow images, so when you forget the hotspot password, the label on the device body is where to find the factory password. Don't peel it off, and don't let it appear in public photos.
Your phone keeps switching to another network
The device hotspot has no internet. When some phones notice "this Wi-Fi can't reach the internet", they switch back to another Wi-Fi or mobile data automatically, and the management interface can't be reached.
| Phone | What to do |
|---|---|
| iPhone | After connecting to the device Wi-Fi, if a "No Internet Connection" notice appears, choose to keep using this network |
| Android | When connecting, if "This network has no internet access. Stay connected?" appears, choose Stay connected; or turn off "Switch to mobile data automatically / Smart network switch" in the advanced Wi-Fi settings |
When the management interface detects that the connection was lost, it shows "Lost connection to the device" and reminds you to reconnect to the device's Wi-Fi.
Connection lost notices
| Notice | When it appears |
|---|---|
| Yellow "Lost connection to the device" notice at the top of the page | The live connection to the device has been lost for more than 6 seconds |
| "That action did not take effect — the device is unreachable" notification at the top right | The action you just sent got no response |
- The notice includes the device's Wi-Fi name, so you know which hotspot to reconnect to.
- The notice disappears automatically once the connection comes back or any action succeeds.
- Automatic reconnection stops trying after about 3 minutes; after that, press "Reconnect" or refresh the page.
- If your phone really is connected to the device Wi-Fi but nothing responds, the device may have gone to sleep or be powered off. Press a physical button to wake it up.
Several people connected at once
- Several phones or computers can connect at the same time, and everyone's screen stays in sync in real time (uploads, deletions, setting changes, refresh status).
- The panel can handle only one refresh at a time. When two people display images at the same time, the later one is rejected ("Send failed, device may be busy").
- While someone has the management interface open, the device must be idle for at least 15 minutes before it goes to sleep; see Sleep and wake-up.
Pages behave oddly after a software update
After a software update, a browser still showing an old page reloads once automatically when you switch pages, to load the new version. If the page still shows errors, refresh it manually, or close the tab and open it again.
Related: Network settings, Startup screen and screen language, Troubleshooting: connection and management interface