Download updates
Latest version: 1.14.0 (2026-11-21)
- chlcd-update-v1.14.0.tar.gz(34.32 MB)
Release notes
New Features • Redesigned Device info page with four tabs: About device, Monitor, Software info and Status. Monitor updates every second with smooth charts and adds 2D graphics usage and image memory; Software info lists the version of each component; Status lists the serial number, network adapter addresses, storage and more • Redesigned System Logs page: one line at the top shows the errors and warnings of the last 24 hours, and clicking a number filters to them; quick time ranges (1 hour, today, 24 hours, 7 days); entries are grouped by date, and identical messages in a row are merged into one row with a count • On the Image Display page you can drag the divider to change the widths of the preview and the image gallery • Added the 13.3-inch outdoor, B3 and 27.6-inch advertising models with lighting • Wi-Fi channel rules for more countries (for example Singapore): the country is set before shipping, and the device uses only the channels allowed there • The presenter remote is now on by default: on a unit where it was never configured, plug in the receiver and use it right away; units where it was turned off stay off • The presenter remote menu now has Restart and Shut down; choosing one first asks for confirmation, with Cancel selected, to prevent accidental presses Improvements • Image upload progress is smoother and no longer stops at 100% while the device finishes processing • While an image changes, the screen shows the current stage (preparing, powering on, starting, transferring, refreshing), and the refresh animation follows the direction and timing of the panel's real refresh • Images that have been shown keep a processed copy, so showing the same image again, or the next image in a slideshow, is faster • System log messages are clearer and their levels more accurate: normal operations are no longer marked as warnings, and only problems that need attention are marked as errors • "Reset screen" and "Clear to white" are now called "Clear screen" everywhere: on the web pages, in the presenter remote menu and in the logs Fixes • After installation or an update, the lighting and the lighting schedule work without restarting the device, and the lighting state is no longer read wrongly after startup • Other units in a cluster are no longer wrongly shown as "older version" and can be viewed and operated again • 31.5-inch units with the new panel firmware now change images normally • When the device name (for example xxx.local) occasionally changed to xxx-2.local and the device could not be found by its name, it now recovers by itself within seconds • Cluster members no longer lose track of each other after a name or address change • Reinstalling no longer downgrades the battery management program to an older version • On some 13.3-inch units, the panel program could not be installed during an update and the whole update was cancelled • After one update failed and was rolled back, later updates kept failing
Required update for older devices
Devices running a version below 1.6.5 cannot install the latest version directly; the update is refused and the device stays on its current version. Update in this order:
- Install the 1.6.5 update file first.
- When the update is finished and the version shows 1.6.5, install the latest version above.
You can see the current version on the Software update page.
| Update file | Purpose |
|---|---|
| chlcd-update-v1.6.5.tar.gz | Required update: devices below 1.6.5 must install this version first |
| chlcd-update-v1.6.4.tar.gz | Older update file; use only when technical support tells you to |
Use only 1.6.5 as the intermediate step
For devices below 1.6.5, use only 1.6.5 as the intermediate step. The 1.7.0–1.7.2 update files leave these devices unable to start after updating, and they then need on-site repair.