Skip to content
This page was translated from the Traditional Chinese original and has not yet been reviewed by a person. If anything is unclear, the Chinese version is authoritative.

Viewing: HTML | Download the E-Paper Content Management System manual as PDF

System Update ​

Where: sidebar → System Settings → System Update

Use this page to update the E-Paper Content Management System itself. It also shows the system license period. Platform Administrators and System Operators see this page.

This is not a device firmware update

This page updates the console system. To update the software on devices, use Firmware Update.

Uploading an update package ​

An update package is a .zip file from the system supplier.

  1. Click "Upload Update Package" at the top right and choose the .zip file.
  2. When the file passes the checks, "Update package uploaded, update started" appears and the system starts updating.

Only while the status is running is the "Upload Update Package" button disabled, so you cannot start a second update at the same time; in other states (for example "Uploaded") it stays enabled. The console may be unavailable for a while during the update; it recovers once the system has restarted.

MessageCause
"The uploaded file is not a valid update package"The file is not an update package from the supplier. Check that the file is not damaged and that you chose the right one
"An update is already running"The previous update has not finished
"Could not reach the update service"The system could not start the update; contact the system supplier

Update status ​

The table on the page shows the latest update. It refreshes automatically while an update is running.

ColumnDescription
"Status"See the table below
"Version"The version of this update package
"Stage"Shown only when stage information exists; see the table below
"Error Detail"Shown only on failure; explains why it failed
StatusMeaning
"No update yet"This system has not been updated yet
"Uploaded"The update package was received and has not started
"Running"The update is in progress
"Succeeded"The update is complete
"Rolled Back"The update failed and the system automatically returned to the version before the update
"Failed"The update failed and the automatic rollback did not succeed either
StageMeaning
"Loading images"Loading the new version
"Tagging previous version"Keeping the version before the update, to roll back to if the update fails
"Restarting services"Restarting the system on the new version
"Health checking"Checking that the new version works properly
"Rolling back"The update failed and the system is returning to the previous version

When an update fails ​

When an update fails, the system automatically returns to the version before the update; you do not need to do anything.

Message on screenMeaning and what to do
Yellow "The last update failed and was automatically rolled back to the previous version"The system is back on the version before the update and works as usual. Give the "Error Detail" to the system supplier
Red "The last update failed and automatic rollback also failed — engineer intervention required"Contact the system supplier right away

License period ​

Below the table, "License Period: start date~end date" appears; when it has not been set it shows "License Period: -".

After the license expires, a reminder banner appears at the top of every page, but no feature is disabled; see License expiry notice.

Only Platform Administrators can edit the license period; System Operators do not see the edit button:

  1. Click the pencil icon next to "License Period" ("Edit license period").
  2. In the "Set License Period" window, choose "Start Date" and "End Date". The end date must be later than the start date, otherwise "End date must be after start date" appears.
  3. Click "Save".

Related pages: Firmware Update, Signing in and your account, User Management

Green Ideas Technology