Skip to content
This page was translated from the Traditional Chinese original and has not yet been reviewed by a person. If anything is unclear, the Chinese version is authoritative.

Viewing: HTML | Download the E-Paper Content Management System manual as PDF

Device List ​

Where: sidebar → Device Management → Device List

See every device's connection status, Wi-Fi signal and control, and send commands to one or several devices. The list refreshes automatically; you do not need to reload the page.

Only Platform Administrators and System Operators see this page, and the two roles can do the same things; the only differences are the connection quality icons and "Blackbox Bundles", described below.

Filtering devices ​

The filter area above the list can combine the conditions below. Click "Search Devices" to apply them and "Clear Filters" to clear them.

ConditionDescription
"Device"Type part of a device name, or choose one from the drop-down
"Status"Multiple choice: "Idle", "Downloading", "Processing", "Displaying", "Offline", "Error", "Unknown". See the note below
"Wi-Fi Signal Strength"Enter a signal range in dBm; see Filtering by Wi-Fi signal
"Tag"Multiple choice; lists devices that have any of the chosen tags

The "Status" filter works only for legacy-protocol devices

The "Status" options are the image refresh states reported by legacy-protocol devices. New-protocol devices do not use these states, so choosing "Idle", "Displaying" and so on does not find them. To see whether a new-protocol device is online, look at the "Connectivity" column of the list. This is a known issue; this page will be updated when it is fixed.

Filtering by Wi-Fi signal ​

"Wi-Fi Signal Strength" has two fields, each with the minus sign already in front; you only enter a number from 1 to 99.

What you enterResult
Only the left field, for example 70Devices with a signal of -70 dBm or stronger
Only the right field, for example 70Devices with a signal of -70 dBm or weaker
Both fields, for example left 80, right 50Devices with a signal between -80 and -50 dBm

When you fill in both fields, put the larger number on the left

The number on the left must be larger than the one on the right (for example left 80, right 50). If you reverse them (left 50, right 80), no device is found.

Devices that currently show no signal value (see Wi-Fi signal strength) do not appear in Wi-Fi filter results.

List columns ​

ColumnDescription
"Device Name"The device's name; the icon beside it copies the name
"Wi-Fi Signal Strength"The Wi-Fi signal the device reported most recently; see the note below
"Connectivity"Whether the device is online right now; see Connectivity
"Control"Who decides what the panel shows; see Control
"Tag"The device's tags; click a tag to rename that tag
"Actions""Edit", "Create Task" and the "⋯" menu for more actions

Click a column heading to sort (except "Actions" and "Control"). Each page shows at most 100 devices.

Wi-Fi signal strength ​

DisplayMeaning
Green dotSignal of -60 dBm or stronger; good
Orange dotSignal between -60 and -80 dBm
Red dotSignal weaker than -80 dBm
Grey dot "- dBm"No usable signal value right now

A signal value is shown only while the device is connected normally and keeps reporting. When a device is powered off, offline or has stopped reporting, this column turns into a grey dot "- dBm" and does not keep showing the old value from before it went offline. The system re-evaluates about once a minute, so this column may update about a minute late when a device has just come online or gone offline.

Connectivity ​

DisplayMeaning
"Online"The device reported within the last 2 minutes
"Waiting for Response"The device has not reported for more than 2 minutes but less than 10
"Not Reporting"The device has not reported for more than 10 minutes and was not powered off. The system also creates an "Unexpected Offline" notification
"Powered Off"The device received the "Power Off" command, replied and shut down, and has not reported since
"Local control · offline"The device is under local control and has not reported for more than 2 minutes
"Unknown"The device has never reported
"Updating Software"The device is running a firmware update. The device may restart during an update; this status is shown in the meantime so you do not mistake the device for being offline

Platform Administrators may also see the following next to "Online":

IconMeaning
Orange exclamation markThere is a connection quality problem (for example "Weak Signal", "High Packet Loss", "AP Roaming Instability"); hover over the icon to see which items
Grey iA legacy-protocol device that can report less data ("Legacy protocol — limited telemetry"). It does not mean the connection has a problem

System Operators do not see these two icons; a device with a connection quality problem shows only "Online" for them.

Control ​

DisplayMeaning
"CMS"The E-Paper Content Management System decides what the panel shows
"Local" (orange)The standalone app on the device decides the screen and schedules; images sent by the E-Paper Content Management System are not shown
"Switching"A "Takeover" or "Release control" command was sent and the device has not reported completion
"Device did not report completion"More than 2 minutes passed after the command was sent and the device still has not reported completion
Lock iconThe device was forced back to local control on site, and cannot be taken over during the lock. Hover over the icon to see "Locked on site until HH:mm"
Orange exclamation markControl mismatch: the control owner the system recorded differs from what the device last reported. Hover over the icon to see what each side says; we suggest "Takeover" again or "Release Control (Switch to Standalone)"

For how control works and what the display itself shows, see CMS connection and control in the Product Guide.

Actions on one device ​

Edit ​

Click "Edit" in the "Actions" column to open the "Edit Device" page.

FieldDescription
"Hostname"The device's ID; cannot be changed
"Name"The device name shown in the console
"Tag"Multiple choice. Tags must be created first in "Tag Settings"

When you are done, click "Save"; click "Cancel" to return to the list. "Schedule Settings" at the bottom of the page shows the schedules that apply to this device; it is read-only, and to change them go to the "Schedule Settings" page.

Create Task ​

Click "Create Task" in the "Actions" column to send an image to this device to display right away.

  1. Drag an image onto the "Image File" area, or click the area to choose a file. Only image files are accepted.
  2. Click "Confirm".

After you send it, check the progress in "Task List". It cannot be sent in these cases:

MessageCause
"already has an active task"This device's previous task has not finished
"Device is under local control. Take over first."The device is under local control; it must be taken over first ("Takeover")

Only one image is sent at a time

The "Image File" area accepts several files, but only the first is sent.

The "⋯" menu ​

Click "⋯" in the "Actions" column to see these items:

ItemDescription
"Device Information"See the device's hardware status, versions and basic data; see Device Information
"Connectivity Diagnostics"See connectivity status and "Incident History"; see Connectivity Diagnostics
"Task Management" → "Task Info"Opens the "Show Task" window; see the note below
"Task Management" → "New Schedule"Opens "New Schedule" with its scope locked to this device (the screen shows "Locked to device: Device Name")
"Task Management" → "Trigger Schedule"Lists the schedules that apply to this device; click one to run it once right away without waiting for its time. Disabled schedules are grey and cannot be clicked; when there are no schedules it shows "No schedule assigned"
"Task Management" → "Clear Current Screen"Clears the screen the device is currently showing
"Power Off"Powers the device off; you are first asked "Confirm Power Off"
"Takeover"Puts the device under E-Paper Content Management System control; you are first asked "Confirm Takeover"
"Release Control (Switch to Standalone)"Returns the device to local control; you are first asked "Confirm Standalone Mode"
"Delete"Deletes this device; see Deleting a device

Platform Administrators also see "Blackbox Bundles", which is for the manufacturer's maintenance and is not described in this manual.

"Task Info" does not show new tasks

"Task Info" lists only display tasks created by the old mechanism. Images sent with "Create Task" or by a schedule do not appear here; look in "Task List". This is a known issue; this page will be updated when it is fixed.

Command restrictions ​

"Power Off", "Takeover", "Release Control (Switch to Standalone)" and "Clear Current Screen" cannot be sent in these cases:

MessageCauseCommands it applies to
"Device already has a pending command"The device has not answered the previous commandAll
"Device is under local control. Take over first."The device is under local control"Power Off", "Clear Current Screen"
"Device Name" is running firmware too old to …. Please update its firmware first.A legacy-protocol device does not support this command"Takeover", "Release Control (Switch to Standalone)", "Clear Current Screen"

"Takeover" is greyed out and cannot be clicked in these cases:

  • The control owner the system has recorded is already "CMS".
  • The device is in an on-site lock. The menu then shows "Locked on site until HH:mm", and it recovers automatically when that time comes.

A device can also refuse a takeover (for example an on-site lock, or it has joined a video wall). You can see the reason for a refusal under "Control Command" in Device Information.

After a release, images sent to the device are no longer shown

The confirmation window says "Switch "Device Name" to Standalone Mode? The device will leave CMS management and show content from its local standalone app." The device returns to local control, the standalone app decides the screen, and images sent by tasks and schedules of the E-Paper Content Management System are not shown. The device still keeps reporting its status. To let the E-Paper Content Management System control it again, click "Takeover".

Deleting a device ​

When you choose "Delete", you are asked "Delete device 'Device Name'?".

Deleting cannot be undone

Deleting also removes the device's tags, groups, schedules, tasks and other related data, and this cannot be undone.

Device Information ​

Open it by choosing "Device Information" from "⋯". From top to bottom it contains:

SectionContents
Hardware status"Observed At", CPU usage and temperature, memory and disk totals, used amounts and usage
"Connectivity Check-in""Last Check-in", "WiFi SSID", "WiFi Signal Strength (RSSI)", "MQTT Connected", "Software Version"
"Component Versions"The current version of each software component on the device: "CMS Component", "Standalone App", "Panel Manager", "Wi-Fi Manager", "TCON bin code". Only the items the device reported are shown
"Control Command"The most recent "Takeover" or "Release control": the times "Sent", "Received by device" and "Completed", and the result "Succeeded", "Failed" or "Rejected" with the reason
"Static Information"Factory data such as "Serial Number", "Model No.", "Part No.", "MAC Address", "Firmware Version", "Screen Type", panel width and height, and "Screen Size (inch)"

Sections the device has never reported are not shown.

Collecting diagnostic data ​

While the window is open, the system asks a new-protocol device to report its latest hardware status every 5 seconds, and the screen updates with it. When there is no data yet, it shows "No diagnostic data yet" and a "Collect Diagnostic Data" button; clicking it asks the device to report immediately.

A legacy-protocol device cannot be collected from on demand. It shows only the data the device reports periodically by itself, marked "This data was converted from a legacy-protocol device report".

Connectivity Diagnostics ​

Open it by choosing "Connectivity Diagnostics" from "⋯" to see the device's current "Connectivity" and "Incident History".

When you open it, if the device is online, the system asks the device to report its latest diagnostic data once:

MessageMeaning
"Collecting latest diagnostic data…"The device has been asked to report; waiting
"Device did not respond; showing previous data"The device did not respond after 30 seconds
"Device is offline; cannot collect the latest diagnostic data"The device is not online; you can only see earlier records
"This device's firmware does not support collecting diagnostic data on demand"A legacy-protocol device; you can only see earlier records

"Incident History" lists these events by time:

EventContents
"Reboot Report"The device restarted
"Recovery Action"A recovery action the device took by itself, and changes of control (for example "Takeover" succeeded or rejected, "Takeover requested on site", "Forced to local in engineering mode")
"Network Incident"A network problem the device found; may include the trigger, the Wi-Fi name and signal, the disconnect reason code, and whether the gateway, DNS and CMS could be reached
"Diagnostic Data"One report of the device's hardware and network status

Exporting diagnostic data ​

Click "Export Diagnostic Data" at the top right of the window and choose "CSV", "Excel" or "JSON" to download. While the device has no "Diagnostic Data" yet, the button is grey, and hovering over it shows "No diagnostic data yet".

Working on several devices at once ​

Tick the boxes on the left of the list. "N devices selected" and the buttons below appear above the list:

ButtonDescription
"Create Task"Sends the same image to all selected devices
"Bulk Clear Screen"Clears the current screen of all selected devices, without asking again
"Bulk Takeover"Asks first, then puts all selected devices under E-Paper Content Management System control
"Bulk Release Control (Switch to Standalone)"Asks first, then returns all selected devices to local control

After sending, a result message appears that lists only what happened, for example "Takeover: 3 succeeded, 1 are under local control".

ResultMeaning
"N succeeded"The command was sent
"N already had a pending command"These devices have not answered their previous command
"N are under local control"These devices are under local control; take them over first
"N need a firmware update first"Legacy-protocol devices do not support this command
"N failed"Other reasons, for example the device was deleted

When "Create Task" is sent to several devices and some fail, "N/M succeeded. Failed: names" appears, listing the failed devices' names and reasons.

Related pages: Tag Settings, Firmware Update, Console tour and role permissions, CMS connection and control

Green Ideas Technology